Aluminum Scrap

Product Description Shall consist of clean aluminum radiators and/or condensers. Should be free of all other types of radiators. All contaminants including iron, plastic, and foam not to exceed 1% of weight. Any deviation to this specification, including oxidation and … Read More

Product Description Shall consist of clean, uncorroded aluminum borings and turnings of two or more alloys and subject to deductions for fines in excess of 3% through a 20 mesh screen and dirt, free iron, oil, moisture and all other … Read More

Product Description Shall consist of new, clean, uncoated and unpainted aluminum scrap of two or more alloys with a minimum thickness of .015” (.38 mm) and to be free of hair wire, wire screen, dirt and other non-metallic items. Oil … Read More

Product Description Shall consist of clean, single-piece, unplated aluminum wheels of a single specified alloy, free of all inserts, steel, wheel weights, valve stems, tires, grease and oil and other non-metallic items. Variations to this specification should be agreed upon … Read More

Product Description To consist of 1000 and/or 3000 series alloys, to be free of paper, plastic, excessively inked sheets, and any other contaminants. Minimum size of 3” (8 cm) in any direction.

Product Description Lorem Ipsum is simply dummy text of the printing and typesetting  industry.Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer. setting, remaining essentially unchanged. It was popularised in the 1960s … Read More

Product Description ADC12 alluminum alloy be widely used the casting products, metalic machines and other motormobiles. Its Chemical Composition: Si 9.6-12.0, Cu 1.5-3.5, Mg 0.3 max, Zn 1.0 max, Mn 0.5 max, Mn 0.5 max, Fe 0.9 max, Ni 0.5 … Read More

Product Description Shall have a minimum density of 14 pounds per cubic foot (225 kg/m3), and a maximum density of 17 pounds per cubic foot (273 kg/m3) for unflattened UBC and 22 pounds per cubic foot (353 kg/m3) for flattened … Read More

Product Description It consist of new, clean, uncoated aluminium castings, forgings, and extrusions of one specified alloy only and to be free from sawings, stainless steel, zinc, iron, dirt, oil, grease and other foreign substances.

Product Description Derived from wet or dry media separation device, the material must be dry and not contain more than 1% maximum free zinc, 1% maximum free magnesium, and 1% maximum of analytical iron. Not to contain more than a … Read More

Product Description Shall be made up of a combination of the nonferrous metals: aluminum, copper, lead, magnesium, stainless steel, nickel, tin, and zinc, in elemental or alloyed (solid) form. The percentage of each metal within the nonferrous concentrate shall be … Read More

Product Description Shall consist of new, clean, unalloyed aluminum wire or cable free from hair wire, ACSR, wire screen, iron, insulation and other non-metallic items

Product Description Shall consist of clean old alloy aluminum sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic … Read More

Product Description Shall consist of all clean aluminum castings which may contain auto and airplane castings but no ingots, and to be free of iron, brass, dirt and other non-metallic items. Oil and grease not to total more than 2%.

Product Description 7005 is an aluminium alloy used primarily for less expensive bicycle frames, due to its relative ease of welding and manufacture, it not requiring expensive heat treating. It has similar physical properties to 6061 aluminium alloy, except it has a higher density of 2.78 g/cm³ (as … Read More